Home > PyroDrone F4 OSD

PyroDrone F4 OSD

Product #: 36949
Rs2,700.00 Price drop alert!
In Stock
Free Shipping


Note :: Plz check the FC  with USB connected to PC/LAPTOP (Betaflight) upon delivery. 
We are not responsible for FC malfunctioning after user does the soldering part. 


The new batch of Pyrodrone F4 OSD includes the Hobbywing G2 harness instead of the original HW.

However we just found out that this can cause the FC burn if plugged in the Aikon or vice versa.
PLEASE Pay extra attention to the wire color.
Both Hobbywing and Aikon use 10 pin connector!
Aikon comes with a PINK wire and HW DOES NOT, this is the easiest way to differentiate the differences for now.
Future batch will have wires labeled, also the current batch we will be adding Warning labels on the bags.

Check the below Race footage from MewoFPV Cory Ibanez 1st place winner at the Nytfury VS Dolma Callout Race using the PyroDrone F4 OSD Flight Controller.

Straight gold. The US currency should be backed by this FC! (Cory Ibanez)

HyperLite F4 OSD

One of the most popular FC’s is back and better than ever, combining an industry favorite layout with new feature sets for freestyle, long range, and racers. Finally, a board for every pilot!  

The new Hyperlite F4 OSD takes the same celebrated ‘flat-bottomed’ layout (crucial for clean and tight builds) and adds a much appreciated OSD and SIX UART ports (more than any other board on the market!) for GPS, RX, SmartAudio, and even Camera Control.  

And with more features, comes improved ease of use with a built in 4-in-1 ESC socket and included harnesses for HobbyWing 45Amp G2,AiKON AK32, and Spedix GS35 4in1 ESCs. The built in solder pads mirror the 4in1 pad layout, so you can easily connect ANY ESC to this board to get features like current sensing and ESC telemetry (for the BL32 guys). 

PLEASE NOTE: The Hyperlite F4 OSD uses it’s own BF target .bin, “PYRODRONEF4”. 

Tech Specifications:
•MPU6000 Gyro
•STM32F405 CPUE @ 168mhz, can be overclocked
•2-6S direct battery input 
•3.3V 100ma, 5V 1.2A BEC
•5V Camera Power
•Built in configurable Betaflight OSD
•Flat bottom PCB for SUPER CLEAN builds
•36x36 PCB with 30.5x30.5 mounting holes
                  UART1 (INVERTER FOR SBUS),
          UART2 (FREE),
                  UART3 (INVERTED TELEMETRY), use CLI command : Set tlm_halfduplex=off 
                  UART4 (Free),
                  UART5 (Smart Audio)
                  UART6 (Free)

Built in 4 IN 1 ESC socket(including ESC telemetry, External current sensor)
Plug and plug with the most popular 4-in-1 ESCs (HobbyWing, Airbot, Spedix, Aikon),with supplied cables
Built in solder pads mirror of the 4-in-1 ESC socket
Printed layout instructions ON the board - no need for instructions!