Home > Power Distribution Board (PDB) > QAV-X 214mm FPV Racing Quadcopter with 4mm arm + Matek PDB-XT60 5v 12V
QAV-X 214mm FPV Racing Quadcopter with 4mm arm + Matek PDB-XT60 5v 12V

QAV-X 214mm FPV Racing Quadcopter with 4mm arm + Matek PDB-XT60 5v 12V

Product #: 16357
Rs2,242.00 Price drop alert!
Out Of Stock


  • Item Name: QAV-X Carbon Fiber Frame Kit
  • Material: Carbon Fiber
  • Wheelbase: 214mm
  • Main Plate : 4mm
  • Battery Protector plate : 1.5mm
  • Frame Weight: about 84.5g
  • Battery board weight: 6g


  • Use 4MM 3K carbon fiberMain Plate . light and simply.
  • The bottom fuselage uses 4MM pure carbon fiber board, fuselage and arms in one make the space bigger and make it stronger.
  • Only 100g, and stable.
  • With 5V 12V distribution board , compatible with 3S and 4S battery
  • With 5 inch flat blade, more efficient than the other propeller.
  • In high strength test, flying fluently in cornering, is suitable for the competition

Recommanded Spare Parts: Not included

  • Brushless motor:1806-2206(KV2000-2300)
  • Brushless ESC:12-30A
  • Flight Controller: Mini CC3D/Naze32
  • Propeller:5030,5040,5045
  • VTX:5.8G 200-600mW 32CH
  • Antenna: Clover antenna/ 14DB flat antenna/ mushroom antenna

Matek PDB-XT60 distribution board:
The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.

It offers a XT60 socket to connect the LiPo pack conveniently.

General:-Input voltage range (3S-4S LiPo operation): 9 - 18V DC

  • Regulated 5V and 12V outputs
  • LED power indicators ( 5V & 12V outputs )
  • 6 ESC outputs & 1 pair VCC/GND pads

ESC outputs:

  • Continuous current: 25A*4 or 15A*6
  • Peak current (10 seconds/minute): 30A*4 or 20A*6

BEC 5V output:

  • Designed for RC Receivers, Flight controllers, OSD, and Servos.
  • DC/DC synchronous buck regulator.
  • Voltage: 5.0 +/- 0.1VDC
  • Continuous current: 2 Amps (Max.2.5A 10s/minute)
  • Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
  • Short-circuit tolerant (5 seconds/minute)

BEC 12V output:

  • Designed for Video TX or FPV camera with linear regulator.
  • The battery should be 4S LiPo (13~18V DC)
  • Voltage: 12.0 +/- 0.3VDC
  • Continuous current: 500mA (Max.0.8A 5s/minute)
  • Short-circuit tolerant (2 seconds/minute)

BEC 12V @ 3S LiPo

  • Output voltage= 3S LiPo voltage -1V


  • -Dimensions: 36 x 50 x 4 mm (without XT60)
  • -Mounting: 30.5 x 30.5mm, Φ3mm
  • - Weight: 7.5g(w/o XT60), 11g(w/ XT60)


  • 2oz copper, 4-layers &1.6mm PCB.
  • Built-in XT60 Socket
  • Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output LED indicators & Short circuit tolerant

Package list:

  • 1 x QAV-X quadcopter frame (unassembled)
  • 1pcs Matek board

Note :this frame aren`t Lumenier frame, the parts and accessories can not be universal.


Similar Products