Home > Antennas & Cables > XBee Module - Series S2C - 2mW with Wire Antenna - XB24CZ7WIT-004

XBee Module - Series S2C - 2mW with Wire Antenna - XB24CZ7WIT-004

Product #: 32206
Rs1,100.00 Price drop alert!
In Stock
Free Shipping

Series 2 XBee "ZigBee" modules is the XBee 2mW Wire Antenna - Series 2C - XB24-CZ7WIT-004. Its good for point-to-point, multipoint and mesh networks. This module is a little more difficult to get going than the Series 1 - you must set up a "coordinator" module so they are not as plug-and-play.

Series 2 modules cannot talk to Series 1 modules so if you already have some S1 type XBees you may want to stick with them. The S2 modules are not necessarily 'better' than S1 for many projects. They're just different as they use the "ZigBee" wireless stack instead of the 802.15.4. This makes them better for low power usage and advanced users who want a mesh topology (many XBees in a spread-out configuration) - but they are more difficult to use for basic point-to-point setups.


  • TX Peak Current: 40 mA
  • RX Current: 40 mA (@3.3 V)
  • Power-down Current: < 1 μA
  • Indoor/Urban: up to 133 ft (40 m)
  • Outdoor line-of-sight: up to 400 ft (120 m)
  • Transmit Power: 2 mW (3 dBm)
  • Receiver Sensitivity: -96 dBm
  • Dimensions: 24mm x 28mm x 9mm (0.94in x 1.1in x 0.3in)
  • 3.24g ( 0.14oz)


Digi XBee Series 2 Page
Dimensional Drawings
Digi Examples and Guides
X-CTU Software


  • Series 1 and Series 2 XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2 modules.
  • We are selling the 2C version of this module. It is functionally the same but uses a different underlying radio chipset.

Similar Products